background image

LOHAS T3

ASSEMBLY INSTRUCTION

1. Place book holder bracket (25) onto the rear of the console (2 holes on the 

    bracket). Use 4 screws (26) to secure.

2. Slide book holder (24) down onto the brackets (25). Use 4 screws (27) to secure. 

    (3 holes on the bracket)

1. Remove the screw (5) , and nut (6) from

    both left and right sides of base frame.

2. Raise the support post (3) and (4). 

    (FIG.1)

3. Refit the screw (5) and nut (6) to both the 

    left and right sides of base frame and 

    tighten. 

4. Place base frame cover (19) onto base 

    frame then use screw (21) to secure. 

    Repeat step on the other side. (FIG.2) 

1. Connect the power wires (7A) , (7B).

Note: Insert excess wiring into right side of console tube.

2. Place handlebars onto the support post, tighten the screws (28) to both the left and 

    right sides.

3. Connect the bottle holder (11) on the bottle rack of console. (FIG.3)

1. If necessary, rotate console tube to get correct position for console racks on 

    handlebars.

2. Tighten 4 screws (22) and washers (23) under both sides of console tube. (FIG.4)

STEP 1: Support post assembly

STEP 2: Handlebar assembly

STEP 3: Console rack assembly

STEP 5: Book holder assembly

FIG.2

4

6

5

5

6

3

19

21

20

21

FIG.1

4

9

8

3

FIG.3

3

28

11

9

10

8

4

7B

7A

28

FIG.5

18

13

18

16

15

17

15

14

FIG.4

22

23

22

23

Back of console

FIG.7

24

27

25

26

1. Place the left upper housing (13) into position. 

    (FIG.5)

2. Place the lower housing (14) into position 

    ensuring that:

    a) That the interlocking pins (B of FIG.6) slide 

        into position.

    b) And also the front plastic pin on the lower 

        housing (A of FIG.6) fit into the handlebar 

        socket hole.

3. Using the screw (15) tighten the lower housing 

    first and then followed by the screw (18) for the 

    upper housing. (FIG.5)

4. Repeat steps 1, 2 & 3 on the right side using 

    parts upper housing (16) and lower (17).

STEP 4: Support post housing assembly

FIG.6

A

B

14

5

Summary of Contents for LOHAS T2


















Reviews: