background image

 
 

14

WARRANTY INFORMATION 

 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing 
defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products purchased and 
used in North America and only to the original purchaser of this product.  To receive warranty service, 
the purchaser must contact La Crosse Technology, Ltd for problem determination and service 
procedures.  Warranty service can only be performed by a La Crosse Technology, Ltd authorized 
service center.  The original dated bill of sale must be presented upon request as proof of purchase to 
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as 
stipulated herein, with new or reconditioned parts or products if found to be defective during the 
limited warranty period specified above.  All replaced parts and products become the property of La 
Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.   
 
Replacement parts and products assume the remaining original warranty, or ninety (90) days, 
whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials for all 
repairs covered by this warranty.  If necessary repairs are not covered by this warranty, or if a product 
is examined which is not in need or repair, you will be charged for the repairs or examination.   
 
The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd 
product to a La Crosse Technology, Ltd authorized service center.  
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the 
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect 
(including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment 
(claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or 
decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s 
manual; (5) damage resulting from the performance of repairs or alterations by someone other than 
an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than 
home use (7) applications and uses that this product was not intended or (8) the products inability to 
receive a signal due to any source of interference. 
 
This warranty covers only actual defects within the product itself, and does not cover the cost of 
installation or removal from a fixed installation, normal set-up or adjustments, claims based on 
misrepresentation by the seller or performance variations resulting from installation-related 
circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE 
OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT TO BE USED 
FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS PRODUCT IS NOT A TOY.  
KEEP OUT OF CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to your State.  
Some States do no allow the exclusion of consequential or incidental damages therefore the above 
exclusion of limitation may not apply to you. 
 

Summary of Contents for WT-5120
















Reviews: