GB
GB
System Requirements for PC use:
The minimum system requirement for use of this “Heavy Weather”
software is:
Operating system: Windows 98 or above
Processor: Pentium 166 MHz or above
RAM: 32MB of RAM or above
Hard disk: 20MB free space
CD-ROM drive
For full details on operation and installation of the “Heavy Weather”
software refer to the PC manual in PDF format on the CD-ROM.
Features of the base station:
•
Receives and displays the DCF77 radio controlled time and date
•
Display of extensive weather data, in all cases with programmable
alarm functions for certain weather conditions as well as records of
all minimum and maximum values along with time and date of their
recordings
•
Indoor and outdoor temperature and relative humidity displays in
degrees Fahrenheit or Celsius (user selectable)
•
Indoor and outdoor relative humidity displays
•
Air pressure reading in inHg or hPa, absolute or relative (user select-
able)
•
Detailed display of rainfall data in 1 hour, 24 hours, total since last
reset (user selectable in mm or inch)
•
Wind speed in mph, km/h, m/s, knots or Beaufort (user selectable)
•
Wind direction display with LCD compass as well as numerical (e.g.
225°) and abbreviated characters (e.g. SW)
•
Wind chill temperature display
•
Dew point temperature display
•
Weather forecast display by weather icons (sunny, cloudy, rainy)
•
Weather tendency indicator
•
Storm warning alarm
•
LED back light
•
Simultaneous display of all weather data with individual settings by
the user
•
COM port for easy connection to your PC
•
All the weather data from the base station and up to 175 sets of
weather history data with user adjustable measuring intervals can be
recorded and uploaded to your PC
Features of the Thermo-Hygro Sensor
The thermo-hygro sensor measures the outdoor temperature and
relative humidity. It also collects the readings from the rain and wind
sensors before transmitting the data to the base station by wireless
433MHz or by the 10 meter cable included in this set.
Features of Wind sensor
The wind sensor measures wind speed and wind direction and sends
the data to thermo-hygro sensor which in turn transmits the data to
the base station. Operating power is taken from the thermo-hygro
sensor using a 10 meter cable connection.
Features of Rain sensor
The rain sensor measures the rainfall and sends the data to thermo-
hygro sensor which in turn transmits the data to the base station.
Operating power is taken from the thermo-hygro sensor by a 10 meter
cable connection.
3. Safety
Notes
•
Damage caused by failure to comply with this instruction manual will
invalidate any guarantee! The manufacturer and supplier will not be
held liable for actions due to failure to comply with this instruction
manual or from data inaccuracies that may occur with this product!
•
In case of harm or damage to a person or property caused by im-
proper handling or failure to comply with this instruction manual, the
manufacturer and supplier cannot be held liable.
•
For reasons of safety and operation, alterations to this device are
strictly prohibited.
•
To operate the weather station, use only supplied adaptor and batter-
ies of the recommended type.
•
Do not leave used-up batteries in the device as these may corrode
and release chemicals that may damage the unit.
•
Inserting batteries in an incorrect polarity will cause damage to this
product.
•
This product is not a toy kept out of the reach of children.
•
Do not depose new or used batteries to fire as they may explosion or
release dangerous chemicals.
•
This product is not to be used for medical purposes or for public
information.
