USB-C
ALT-MODE
TRAVEL DOCK
WITH PD PASS
THRU
QUICK START GUIDE
410-3698-001A / DOCK412USZ
Docking Station Diagram
Specifications
Windows Setup
To ensure the best Windows performance, please be sure to update your
host PC BIOS (Firmware), display adapter driver. Using the Windows
Control Panel Display Screen Resolution window, the connected monitors
can be configured to either mirror your main screen, or extend the Windows
desktop allowing visibility of more applications at the same time.
Screen Resolution window allows full configuration of all displays monitors,
including:
• Display orientation and location modification
• Layout of displays
• Resolution up to
Single display mode:
- mDP, HDMI : 4096 x 2160 p30
- VGA : 1920 x 1080
OS-X Setup
Macbook users can use the System Preferences for Displays to adjust the
external monitors. OS-X allows configuration of all displays, including:
• Resolution up to
Single display mode:
- mDP, HDMI : 4096 x 2160 p30
- VGA : 1920 x 1080
• Display orientation and location modification
• Layout of displays
Lock Slot
Gigabit
Ethernet
USB-C
USB-C
HDMI
VGA
Mini DP
USB 3.0
USB 3.0
Contents
• USB-C Alt-mode Travel Dock with
PD Pass Thru
System Requirements
Hardware
• USB-C enabled laptop with supporting DisplayPort Alternative Mode
Operating System (any of the following)
• Microsoft Windows
®
10 (32/64-bit)
• Mac OS
®
X v10.11 or later
Visit
www.targus.com
for a list of the latest compatible
operating systems
• Single display mode supporting either ofthe following:
- mDP (4096 x 2160 p30 max)
- HDMI (4096 x 2160 p30 max)
- VGA (1920 x 1200)
• USB-C upstream cable (Laptop charging capable by PD pass through)
• 2 x USB 3.1 Gen 1 type A downstream port
• 1 x USB-C PD pass through port with USB 3.1 Gen 1 downstream data
support
• Gigabit Ethernet
• Kensington Lock Slot
Features and specifications are subject to change without notice. Microsoft
and Windows are registered trademarks of Microsoft Corporation in the United
States and/or other countries. All trademarks and registered trademarks are
the property of their respective owners. ©2017 Targus, 1211 North Miller
Street, Anaheim, CA 92806
Three Year Warranty
Declaration of Conformity
Regulatory Compliance
Product Registration
FCC Statement (Tested to Comply)
Targus recommends that you register your Targus accessory shortly after
purchasing it. Go to:
http://targus.com/us/product_registration
You will need to provide your full name, email address, country of residence
and product information.
We pride ourselves on the quality of our products. For complete warranty
details and a list of our worldwide offices, please visit www.targus.com.
Targus product warranty does not cover any device or product that is not
manufactured by Targus (including, but not limited to, laptops, smartphones,
devices, or any other product that may be used in connection with the Targus
product). Australian customers: For complete warranty details see warranty
statement enclosed.
Targus is a registered trademark of Targus International LLC in the US and in
certain other countries. Microsoft, Windows and Windows Vista are
registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. Mac is a trademark of Apple Inc., registered in
the U.S. and other countries. USB Type-C is a trademark of USB
Implementers Forum, Inc. HDMI is a registered trademark of HDMI Licensing,
L.L.C. Corporation Delaware. All logos and registered trademarks are the
property of their respective owners. ©2017 Targus, 1211 North Miller Street,
Anaheim, CA 92806. All rights reserved.
AUSTRALIAN AND NEW ZEALAND CONSUMERS ONLY
Thank you for your purchase. Targus warrants to the original purchaser that its
products are free from defects in materials and workmanship, during the
specified warranty period, and lasts as long as the original purchaser owns
the product. The warranty period is stated on the packaging or in the
documentation provided with this Targus product. Targus’ Limited Product
Warranty excludes damage caused by accident, neglect, abuse, misuse,
improper care, normal wear and tear, ownership transfer, or alteration. The
limited warranty also excludes any product that is not manufactured by Targus
(including, without limitation, laptops, smartphones, devices, tablets, or any
other non-Targus item) that is used in connection with the Targus product.
In the event that the Targus product has a defect in materials or workmanship
Targus will, after receiving a warranty claim and inspecting the product, at its
discretion, do one of the following: repair, replace, or refund with the same or
a similar product (or part) of no lesser quality and ship it to the original
purchaser at Targus’ expense. As part of this inspection, proof of purchase will
be required. There is no charge for inspection. To make a warranty claim,
please contact Targus Australia or New Zealand (see details below), or return
the product to the place of purchase. The original purchaser must bear the
cost of the delivery to Targus.
Under Australian and/or New Zealand Consumer Laws, in addition to any
warranty Targus gives, our products come with guarantees that cannot be
excluded. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are
entitled to have the products repaired or replaced if they fail to be of
acceptable quality and the failure does not amount to a major failure.
For any warranty question, contact Targus Australia Pty. Ltd. (i) by mail at
Suite 2, Level 8, 5 Rider Boulevard, Rhodes NSW 2138, by phone AUS
1800 641 645 or NZ 0800 633 222 or by Email: [email protected]. For
additional information, check out our website at targus.com/au/warranty.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operations.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
Hereby, Targus declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive: 2014/30/EU.
Technical Support
For technical questions, please visit:
US
Australia
New Zealand
Internet: http://targus.com/us/support
Internet: http://www.targus.com/au/support
Email: [email protected]
Telephone: 1800-641-645
Telephone: 0800-633-222
