69
Socket for wind
sensor
them at their final destinations (See Positioning below). Spin the wind vane and tip
the rain gauge to test.
1.
Unwind the cables of the Wind sensor. Connect the Wind sensor to the Thermo-
hygro transmitter by plugging the connector heads into the sockets of the
Thermo-hygro transmitter. Cord should “click” into place.
2.
First insert the batteries into the Thermo-hygro transmitter and Rain sensor (see
“How to install and replace the batteries into the Thermo-hygro
transmitter“ & How to install and replace batteries into the Rain sensor
below).
3.
Then insert the batteries into the Weather Station (see “How to install and
replace the batteries into the Weather Station” below). Once the batteries are
installed, all segments of the LCD will light up briefly and a short signal tone will
be heard. It will then display the time as 00:00, the date as 1.1.05, the weather
icons, and air pressure value. "- - -" will be shown for outdoor data.
