background image

 

14

 

 

Full Moon 

Large Waning Gibbous

 

Small Waning Gibbous

 

Last Quarter

 

Large Waning Crescent 

Small Waning Crescent

 

New Moon

Small Waxing Crescent 

 

Large Waxing Crescent

 

First Quarter

 

Small Waxing Gibbous 

Large Waxing Gibbous 

 

General Alarm Icon 

The general indoor alarm icon will flash when indoor temperature alarm, indoor humidity alarm or air pressure alarm 
occur. The general outdoor alarm icon will flash when the outdoor temperature and humidity alarm occurs.  

 

To switch off the general alarm icon, press the ALM DATA key.  

 

Additionally, the trigged alarm value and time will then be displayed briefly for 2 seconds on the bottom part of 
the weather station LCD. 
If more than one Weather Alarm occurred, each trigged alarm value and time can be viewed by pressing the 
ALM DATA key. Each Weather Alarm will be displayed for 2 seconds.  

 

The general indoor (or outdoor) alarm icon will be switch off when all indoor (or outdoor) trigged alarms information are 
displayed. 

 

MOON PHASE  

The Moon icon of the weather station will also display 12 different Moon phases according to the set calendar.  

 

Note:

 In the southern hemisphere, the phases of the moon are same but the shape of the moon is mirror inverted.

 

 
 
 

 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for WS-9119U

























Reviews: