18
TO RESET THE MIN/MAX VALUES TO CURRENT VALUES:
To reset individual indoor and outdoor MIN/MAX values to current values:
1.
Press the MAX/+, MIN/- and CH key to select the desired MIN/MAX value.
2.
Press the SET key to reset the selected value to current value
Note:
To reset all indoor and outdoor MIN/MAX values to current values, press and hold the MAX/+ or MIN/- key for 3
seconds.
OUTDOOR CHANNEL RE-LEARN MODE
In case the temperature data in a particular outdoor channel often shows “--.-“ due to low battery level or false reset of a
transmitter, that transmitter can be set up again individually or all (if more than 1 transmitter and the “lost” channel can
be re-learned again by entering the channel re-learn mode.
To re-learn ALL channels:
1.
Press and hold the CH key for 3 seconds (outdoor reception signal will show next to channel display).
To re-learn the CURRENT selected channel:
1.
Press and hold the SET key while pressing the CH key (outdoor reception signal will show next to channel
display).
Note:
If the SET key is pressed too long, the intelligent weather station will enter the Manual Setting modes instead.
EL BACKLIGHT
The EL backlight is automatically switched ON when any keys are pressed. The EL backlight will be switched on for
approximately 15 seconds before automatically switching OFF.
LOW BATTERY INDICATOR
The low battery indicator will be displayed in the LCD when the battery power of the intelligent weather station is low. It
is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of the intelligent
weather station.
Note:
After battery change, both the intelligent weather station and the transmitter(s) need to be reset (see note
”
Setting up
”)
