![background image](http://html1.mh-extra.com/html/tecscan/funcaster-barometer/funcaster-barometer_quick-start-manual_1072707001.webp)
Custom Settings
Press
BAR
to choose Time or
Barometer
Press
DOWN
to choose
Fahrenheit or Celsius
Press
UP
to choose Barometric
Unit, inHg or hPa/mb.
Important Details
a) Removing batteries resets to Factory
Default settings.
b) To test temperature accuracy, place unit on
plastic or wood, near your home
’
s HVAC
thermostat for about 4 hours.
c) Adjusting barometer will
not
affect 8
-
12
hour weather outlook calculation.
d) If FUNcaster becomes wet, promptly
remove batteries, pat dry, and place in warm
dry area for 48 hours. Restart as usual.
To Install FUNcaster
®
A. Remove battery cover (Note polarity)
insert 2 AAA batteries. Replace cover.
B. Install out of direct sunlight, high and
away from dark colors, protected from
rain and spray as possible.
C. Fully clean location surface before
attaching with nylon fastener.
FUNcaster
®
Barometer
Range of Data Displayed:
Temperature: 32
o
F/0
o
C
to
140
o
F/60
o
C
Lo
= temps below 32
o
F/0
o
C
Hi
= temps above 140
o
F/60
o
C
Humidity: 10 % to 99 %
Barometer: 23.62 to 32.48 inHg, hPa/mb
NOAA RAIN (%) GUIDE
10 or 20%: ISOLATED SHOWERS
30, 40, or 50%: SCATTERED SHOWERS
60 or 70%: SHOWERS LIKELY
BAROMETRIC ALGORITHM
8
-
12 HOUR OUTLOOK
HELP: 1
-
352
-
264
-
7877 or [email protected]
WEBSITE: https://store.tecscan.com
HELP: 1
-
352
-
264
-
7877 or [email protected]
WEBSITE: https://store.tecscan.com