26
temperatures. Only the outdoor temperature display on the LCD will be reset. To reset an outdoor
temperature moves to the desired transmitter no.
OUTDOOR TEMPERATURE 1, 2, AND 3
If the more than one transmitter is being used, to alternate between the temperature readings of transmitter
1, 2, and 3, simply press the
“SET/CHANNEL”
key. If the reading is from transmitter 1, then the
identification numbers 1 will be displayed in the outdoor temperature section of the LCD. The same will
apply to the next transmitter and so on. However, if only one transmitter is used, no identification number
will be displayed on the LCD.
CHECKING FOR 868 MHz RECEPTION:
In normal surroundings (for example away from interfering sources such as TV sets), the outdoor
temperature can usually be easily received within 2 minutes. If the outdoor temperature is not displayed on
the LCD after 2 minutes, then check the following:
1.
The distance of the units should be at least 1.5 - 2.0 meters away from interfering sources such as
computer monitors or TV sets.
2.
Avoid placing the units onto or in the immediate proximity of metal doors, window frames or
structures.
3.
Using other electrical products such as headphones and speakers that operate on the same signal
(868 MHz) can prevent the transmission pick up.
4.
Neighbours using electrical products operating on the 868 MHz signal can also cause interference.
In most severe cases, the reception is only possible once all other electrical products using the 868
MHz are switched off.
5.
Within thick concrete rooms such as basements and tower blocks, the 868 MHz signal can be
weakened (avoid placing near metal frames and structures).
