19
FEATURES:
•
LCD clock in 12 or 24 hour time display
•
Indoor and outdoor temperature reading in degree Celsius (°C) or degree Fahrenheit (°F)
•
Can receive up to three Outdoor transmitters
•
Indoor and outdoor temperature with Minimum and Maximum records
•
Wireless transmission at 868 MHz
•
Signal reception intervals at 4 seconds
•
Table standing or wall mountable (detachable table stand)
SETTING UP:
WHEN ONE TRANSMITTER IS USED
1.
First, insert the batteries in the transmitter (see “
How to install and replace batteries in the
Temperature Transmitter
”
below).
2.
Within 2 minutes of powering up the transmitter, insert the batteries in the Temperature
Station (see “
How to install and replace batteries in the Temperature Station
”
below).
Once the batteries are in place, all segments of the LCD will light up briefly. Following the
indoor temperature and the time as 0:00 will be displayed. If these information are not
displayed on the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds
before reinserting them. Once the indoor data is displayed user may proceed to the next step.
3.
After the batteries are inserted, the Temperature Station will start receiving data signal from
the transmitter. The outdoor temperature data should then be displayed on the Temperature
Station. If this does not happen after 2 minutes, the batteries will need to be removed from
both units and reset from step 1.
