14
walls, concrete, and large metal objects can
reduce the range. Place both units in their
desired location before permanently
mounting the Remote Control Sender.
There should be a change of temperature in
the OUTDOOR LCD within 6 minutes.
The Remote Control Sender can be mounted in
two ways:
•
with the use of screws or,
•
using the adhesive tape.
1.
MOUNTING WITH THE
SCREWS
a)
Remove the mounting bracket
from the Remote Control
Sender (figure 2).
b)
Place mounting bracket over
desired location. Through the
three screw holes of the
bracket, mark the mounting
surface with a pencil.
