19
offers the same plus a 10’ probe to insert in a
pool, spa, soil, etc.). Assign a number to each
Remote Control Sender (i.e. #1 will be for
outdoors, #2 will be for the basement, etc.).
This will help you determine which
temperature, from which Sender, you are
reading on the Indoor Temperature Station.
Note:
When setting up multiple units it is
important to insert batteries
first
into all the
Remote Control Senders, and in numeric
sequence.
Second
install batteries into the
Indoor Temperature Station. Transmission
problems will arise if this is not done correctly
and if the total time for set-up exceeds 6
minutes.
