P a g e
| 31
stored maximum and minimum weather data can be viewed by pressing the
MIN/MAX key in normal display mode.
1. MIN/MAX indoor temperature with the date and time of recording
2. MIN/MAX indoor humidity with the date and time of recording
3. MIN/MAX outdoor temperature with the date and time of recording
4. MIN/MAX dew point temperature with the date and time of recording
5. MIN/MAX outdoor humidity with the date and time of recording
6. MAX wind gust with the date and time of recording
7. Total rainfall with the date the rainfall total was last reset. If the rainfall
total has not yet been reset, "---.--.---- will be displayed for the date.
RESET THE MIN/MAX WEATHER DATA
1. Press MIN/MAX key to show the desired weather data.
2. Press
Ÿ
UP ARROW key. The stored value will be reset to the current value and
current time. To reset the MIN/MAX weather data, you need to reset each of
the values independently.
TOTAL RAINFALL AMOUNT
The total rainfall measurement is displayed in the unit of mm or inch. It shows the
total rainfall accumulated since last reset of the total rainfall amount.
In either Mode 1 or Mode 2 display, press the MIN/MAX key until the display
shows the total rainfall value.
To reset the rainfall reading, press the
Ÿ
UP ARROW key. The total rainfall amount
will be reset to 0, and the time updated to current time.
Note:
Until the first rainfall total reset is performed, the time and date of the
total rainfall are displayed as "- - -.--.----". After the rainfall total is reset, the rainfall
total display will indicate the date and time of the last rainfall total reset.
CARE AND MAINTENANCE:
x
Extreme temperatures, vibration and shock should be avoided as these may
cause damage to the unit and give inaccurate forecasts and readings.
x
Precautions shall be taken when handling the batteries. Injuries, burns, or
property damage may be resulted if the batteries are in contact with
conducting materials, heat, corrosive materials or explosives. The batteries
