P a g e
| 11
data collected by the sensor will not be affected by the temperature of the air
coming out of the attic.
To wall mount the thermo-hygro sensor, fix the wall holder onto the desired wall
using the included screws, plug the sensor firmly into the wall holder and replace
the rain cover if it is not already in place.
Note:
After mounting the units, if the
weather data is not received, press and hold the
Ÿ
UP ARROW key for 2 seconds
to synchronize the wireless display to the sensors.
HEAVY WEATHER PC SOFTWARE
Use your PC to store and graph the latest weather data collected by the
weather station. Download the Heavy Weather PC software from
www.lacrossetechnology.com/2811.
The Heavy Weather Pro User's Guide available on the download page details
the computer requirements, installation and usage instructions.
FUNCTION KEYS:
SET KEY
x
Press and hold for 3 seconds to enter the SET mode, where the following
can be changed: LCD contrast, Manual time setting, 12/24 hour time
display, Date setting, °F/°C temperature unit, Wind speed unit, Rainfall unit,
Pressure unit, Relative pressure reference setting, Weather tendency
threshold setting, Storm warning threshold setting and Storm Alarm On/ Off
setting, Wind direction display type, Factory reset
x
Press to toggle between the display of Mode 1 or Mode 2:
o
Mode 1:
"Wind speed + outdoor temp + 24 hr. pressure history
graph"
o
Mode 2:
"Gust + Dew Point temp + 72 hr. pressure history graph "
Mode 2 is displayed for 30 seconds, returning to Mode 1
automatically.
x
In the weather alarm setting mode, press to switch the weather alarm On
/ Off
x
In the weather alarm setting mode, press and hold to adjust the weather
alarm value
x
Stop the weather alarm during ringing
Ÿ
UP ARROW KEY
