background image

4. Packaged 

Contents 

5. Setting 

up 

 

 

Before setting up, carefully unpack the contents onto a table or flat surface and 
check that the following are complete: 

First, choose to use the adaptor (included in this set) or batteries for operation.  
Both these methods allow for operation using wireless 433MHz transmission 
or cable connection between the base station and the sensors and setting up 
for both methods is as follows: 

 

Item: 

 

 

 

Consisting 

of:

Fittings:

Illustration:

 

 

 

 

Base 
Station 

• 

Main unit 

 
 
 
 
 

• 

AD/DC 120V power 
Adaptor - optional use 
(included) 

 
 
 
 
 
 

 

 

 

 

Thermo-
Hygro 
Sensor 

• 

Main unit 

• 

Rain protection 
cover 

 
 
 

• 

32ft cable - optional 
connection to the base 
station (included) 

• 

Wall mounting screws 

• 

Plastic anchors for 
screws 

 

 
 

 

 

 

 

Wind 
Sensor 

• 

Main unit with 
wind vane 

• 

32ft cable 
(already 
attached to the 
main unit) 

• 

Mast holder  

 

• 

2 x U-bolts for mast 
holder 

• 

4 x Washers 

• 

4 x Nuts 

• 

1 x screw (to fix main 
unit to the mast holder 

 
 
 
 
 
 

 

 

 

 

Rain 
Sensor 

• 

Main unit (base 
and funnel) 

• 

32ft cable 
(already 
attached to the 
main unit) 

 

 

 
 
 
 
 

 

 

Heavy 
weather 
PC 
software 

CD-Rom format 
(English version 
only) 

• 

6.5ft PC cable for PC 
connection - optional 
use (included) 

 
 
 

 
 

 

Base Station: 

 
 
 
 
 
 
 
 
 
 
 
 

Note:

 flip open the front panel under the PRESSURE, DISPLAY and WIND 

keys to reveal the SET, + (plus), - (minus), ALARM and MIN/MAX operation 
keys 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

Battery 
compartment 

Socket for Thermo-
Hygro Sensor 

Socket for 

Ad ptor 

a

PC COM Port 

 

 

 

Front Panel 

 

Operation 

Keys 

 

Summary of Contents for WS-2315



















Reviews: