background image

2)  Continue to press the ALARM key until you reach the indoor humidity high 

alarm set mode 

3)  Press and hold the SET key to enter the indoor humidity high setting 

values (% digits will start flashing) and set the desired indoor humidity high 
by using the PLUS (+) or MINUS (-) keys 

4)  Press ALARM key to confirm and press the MIN/MAX key to return to the 

normal display mode or press the ALARM once more to toggle to the 
indoor humidity low alarm set mode. 

5)  Press and hold the SET key to enter the indoor humidity low setting values 

(digits will start flashing) and set the desired indoor humidity low by using 
the PLUS (+) or MINUS (-) keys 

6)  Press ALARM key to confirm and press the MIN/MAX key to return the 

normal display mode or press the ALARM once more to toggle to another 
alarm setting mode. 

  

Outdoor humidity high alarm and low alarm setting 

1)  Press the ALARM key to enter the normal time alarm 
2)  Continue to press the ALARM key until you reach the outdoor humidity 

high alarm set mode 

3)  Press and hold the SET key to enter the outdoor humidity high setting 

values (digits will start flashing) and set the desired outdoor humidity high 
by using the PLUS (+) or MINUS (-) keys 

4)  Press ALARM key to confirm and press the MIN/MAX key to return to the 

normal display mode or press the ALARM key once more to toggle to the 
outdoor humidity low alarm set mode. 

5)  Press and hold the SET key to enter the outdoor humidity low setting 

values (digits will start flashing) and set the desired outdoor humidity low 
by using the PLUS (+) or MINUS (-) keys 

6)  Press ALARM key to confirm and press the MIN/MAX key to return the 

normal display mode or press the ALARM once more to toggle to the to 
enter another alarm setting mode. 

 

Wind chill high alarm and low alarm setting 

1)  Press the ALARM key to enter the normal time alarm 
2)  Continue to press the ALARM key until you reach the wind chill high alarm 

set mode 

3)  Press and hold the SET key to enter the wind chill high setting values 

(digits will start flashing) and set the desired wind chill high by using the 
PLUS (+) or MINUS (-) keys 

4)  Press ALARM key to confirm and press the MIN/MAX key to return to the 

normal display mode or press the ALARM key once more to toggle to the 
wind chill low alarm set mode. 

5)  Press and hold the SET key to enter the wind chill low setting values (digits 

will start flashing) and set the desired wind chill low by using the PLUS (+) 
or MINUS (-) keys 

6)  Press ALARM key to confirm and press the MIN/MAX key to return the 

normal display mode or press the ALARM once more to toggle to another 
alarm setting mode. 

 

Dew point alarm high alarm and low alarm setting 

1)  Press the ALARM key to enter the normal time alarm 
2)  Continue to press the ALARM key until you reach the dew point high alarm 

set mode 

3)  Press and hold the SET key to enter the dew point setting values (digits 

will start flashing) and set the desired dew point high by using the PLUS 
(+) or MINUS (-) keys 

4)  Press ALARM key to confirm and press the MIN/MAX key to return to the 

normal display mode or press the ALARM key once more to toggle to the 
dew point low alarm set mode. 

5)  Press and hold the SET key to enter the dew point low setting values 

(digits will start flashing) and set the desired dew point low by using the 
PLUS (+) or MINUS (-) keys 

6)  Press ALARM key to confirm and press the MIN/MAX key to return the 

normal display mode or press the ALARM once more to toggle to another 
alarm setting mode. 

 

Rainfall 24h alarm setting 

1)  Press the ALARM key to enter the normal time alarm 
2)  Continue to press the ALARM key until you reach the rain 24 hour alarm 

set mode 

3)  Press and hold the SET key to enter the rain setting values (digits will start 

flashing) and set the desired rain values by using the PLUS (+) or MINUS 
(-) keys 

4)  Press ALARM key to confirm and press the MIN/MAX key to return to the 

normal display mode or press the ALARM key once more to toggle to 
another alarm setting mode. 

 

Rainfall 1h alarm setting 

1)  Press the ALARM key to enter the normal time alarm 
2)  Continue to press the ALARM key until you reach the rain 1 hour alarm set 

mode 

3)  Press and hold the SET key to enter the rain setting values (digits will start 

flashing) and set the desired rain values by using the PLUS (+) or MINUS 
(-) keys 

4)  Press ALARM key to confirm and press the MIN/MAX key to return to the 

normal display mode or press the ALARM key once more to another alarm 
setting mode. 

 
 
 

Summary of Contents for WS-2315



















Reviews: