4
Basic Installation
Mount the Mast to a flat
surface with the four
provided screws.
Place the Sensor on top
of the Mast. Ensure the
Solar Panel is facing the
sun.
Secure the Sensor to the
Mast by tightening the
screws on the side.
1.
2.
3.
Hand Screw
Flexible Installation
Remove the Small Insert from the bracket
and install the Hand Screw in its place. Then
secure the sensor to the Mast by tightening
the screws on the side (step 3 above).
This configuration allows you to attach the
sensor to angled locations and easily make
adjustments to ensure the Mast and Sensor
are level.
Remove
