Press “ ” button to confirm your setting and to end the setting procedure
F.Y.I.:
After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal
clock mode.
Alarm ON/OFF
The alarm shift switch is pushed in the “ ” position, LCD display the “ ” icon, the alarm function is open, at
the same time, the sound of "BI" sounded.
Product back of the alarm shift switch is pushed in the “
” position, the “ ” icon disappears, the alarm
function is close
Note :
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time
unit is minutes.
While the alarm is sounding, press any button except the “
” button or touch the "
" field for more
than 3 seconds to stop the alarm signal.
Snooze Function:
While the alarm is sounding, Touch the "
" field once to activate the snooze function. The alarm signal
sounds again after already been set.
In snooze mode, press any button except the “
” button or touch the "
" field for more than 3
seconds to exit the snooze mode.
Note:
When the snooze function is set to OFF, while the alarm is sounding, press “
SNZ
” does not have this snooze
function.
Maximum/Minimum Temperature/Relative Humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “
MEM
” button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values.
