La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 11
31.Confirm all calendar settings with the SETTINGS
button and select
Fahrenheit/Celsius.
32.
°F
will flash.
33.Press and release the + or - buttons to select Celsius.
34.Confirm with the SETTINGS button and exit.
Does the clock have a backlight?
•
No, as this clock is battery operated there is no backlight.
Time is off by hours
•
Check to see if the
WWVB
Tower icon appears on the atomic digital clock. If
not, the digital clock has not received a WWVB time signal in the past 24
hours.
•
Reposition the digital clock with the front or back facing Colorado.
•
Check that the
Time Zone
selected correctly reflects your location. Adjust the
time zone in the
•
Check that the DST indicator is correct for your location (On this clock, please change
the DST setting to OFF unless you live in Arizona). Adjust the DST indicator in the
•
Large buildings, metal roofed buildings and buildings or rooms full of
electrical and/or radio equipment make it difficult to receive the WWVB time
signal.
Daylight Saving Time
•
Dependent on your location, position of the clock in your home, and
atmospheric interference, it may take up to 5 nights for the change from
Daylight Savings Time to Standard Time and vice-versa to occur.
•
Check for a
WWVB
Tower Icon showing on the atomic digital clock. The tower
icon indicates you have received the WWVB signal from Ft Collins CO in the
past 24 hours.
•
Check that the clock is in the correct
Time Zone
.
•
Check whether the DST indicator is ON or OFF. On this clock, please change
the DST setting to OFF unless you live in Arizona.
•
Check for fresh
. Without proper batteries, the antenna will have a
harder time picking up the signal.
•
Position the digital clock in a window (
with the front or back
) facing Ft.
Collins, Colorado and leave for up to five nights. If you do not have a window
facing this direction, position the clock near an outside wall and point the unit
in this general direction.
Atomic clock is dim
Explanation:
Most atomic clocks have a dark background. Place the atomic clock
at eye level, to determine if it is dim. Atomic clocks that sit in the sunlight can
develop a cloudy film over time.
•
This is generally a power related issue.
•
may be overpowered or underpowered. Remove batteries from
atomic clock.
•
Press any button 20 times. Leave the atomic clock unpowered for 1-2 hours.
•
Install fresh alkaline batteries with correct polarity.
