background image

La Crosse Technology, Ltd. www.lacrossetechnology.com/support 

Page 7 

 

 

Do not mount near electrical wires, transmitting antennas or other items that will 

interfere 

with the signal. 

 

RF (radio frequency) signals do not travel well through moisture or dirt. 

 

Do not mount the outdoor sensor on a metal fence. This significantly reduces the 

effective

 range

. 

 

MOUNT 

Option 1: 

 

Install one mounting screw (not included) into a wall. 

 

Place the outdoor sensor onto the screw (hanging hole on the backside). 

 

Gently pull down to lock the screw in place.  

 

Option 2:    

 

Insert the mounting screw through the front of the outdoor sensor and into the wall.  

 

Tighten the screw to snug (do not over tighten). 

 

Position Temperature Station 

 

 

The temperature station has a wide base to sit on a desk or table.  

 

Place within 

range 

of the outdoor sensor.  

 

The maximum transmitting range in open air is 300 feet (91 meters).  

 

Obstacles such as walls, windows, stucco, concrete and large metal objects can 

reduce the range. 

 

Choose a location 6 feet or more from electronics such as cordless phones, 

wireless gaming systems, televisions, microwaves, routers, baby monitors, etc., 

which can prevent signal reception. 

 

Be aware of electrical wires and plumbing within a wall. This will interfere with RF 

(radio frequency) signal reception. 

 

Distance/Resistance/Interference 

 

Distance:  

 

The maximum transmitting range in open air is over 300 feet (91 meters) between 

the outdoor sensor and the temperature station. This range is in open air with ideal 

conditions. 

 

Consider what is in the signal path between the temperature station and the 

outdoor sensor. 

 

Avoid placing electronic in the signal path between the temperature station and the 

outdoor sensor. 

 

Resistance:  

 

Obstacles such as walls, windows, stucco, concrete and large metal objects can 

reduce the range.  

 

When considering the distance between the outdoor sensor and the temperature 

station (300 feet open air), cut that distance in half for each wall, window, tree, bush 

or other obstruction in the signal path.   

 

Closer is better. 

 

Windows reflect the RF (radio frequency) signal.  

Summary of Contents for 308-179ORV2













Reviews: