La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 10
3.
Hold the + or - buttons to adjust quickly.
4.
Press the ALARM/SNOOZE button to confirm adjustments and move to the next item
or exit
Note: When no buttons are pressed for ten seconds, the temperature station will save the
last change and default back to normal mode
Activate/Deactivate time alarm
•
The alarm is active when set.
•
From normal time display, press and release the ALARM/SNOOZE button to deactivate
or activate the alarm. The alarm time will show for 2 seconds.
•
Alarm icon and ALM ON will show then active
•
ALM OFF will show when inactive.
Snooze Alarm
•
When alarm sounds, press the ALARM/SNOOZE button to silence alarm for 10 minutes.
•
The alarm icon will flash. SNZ will show and the remaining Snooze Time will count
down.
•
Press any button except ALARM to silence the alarm for 24 hours
Time is off by hours
•
This temperature station has manual set time.
•
Use the
to set the time.
Manually Set Time/Date: Program Menu
1.
Hold the SET button 3 seconds to enter settings mode.
2.
Press the + or - button to adjust the flashing values.
3.
Hold the + or - buttons to adjust quickly.
4.
Press the SET button to confirm adjustments and move to the next item.
Settings order:
•
Beep ON/OFF
•
12/24 Hour Format
•
Hour
•
Minutes
•
Year
•
Month
•
Date
•
Month/Date, Date/Month
•
Temperature Fahrenheit/Celsius
To begin:
NOTE:
In 24 hour format the AM/PM will
count seconds.
