La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 9
Power Requirements
•
2-AA Alkaline batteries power this temperature station.
12-Hour or 24-Hour time format
•
Time can display in 12-hour (am, pm) or 24-hour format.
•
Default is 12-hour time.
•
Use the
to switch time formats.
Fahrenheit/Celsius
•
to switch between Fahrenheit and Celsius.
Dashes, HH.H, LL.L or stuck Indoor Temperature
Explanation: These symbols are error messages indication the indoor sensor is outside of
its readable range. For indoor readings, this is generally a power related issue.
•
may be overpowered or underpowered. Remove batteries from the
temperature station.
•
Press any button 20 times. Leave the temperature station unpowered for 1-2 hours.
•
Install fresh Alkaline batteries with correct polarity.
•
If the indoor temperature is still shows dashes, HH.H or LL.L, the temperature station
may need replacement.
Inaccurate Indoor Temperature Reading
Explanation: When the indoor temperature is inaccurate, it is often due to the location of
the display or overpowered/under powered batteries. You can test the accuracy at you
home.
Side-by-side test: Bring the outdoor sensor in the house and place it next to the
temperature station for 2 hours.
•
Compare indoor and outdoor temperature. The temperature should be within 4
degrees to be within tolerance.
•
Look for heat sources such as sunlight, door or window frames or reflected heat or
cold near the temperature station.
Set Time Alarm
1.
Hold the ALARM/SNOOZE button 3 seconds to enter settings mode.
2.
Press the + or - button to adjust the flashing values.
