English
25 EN
Placing the cursor on the various selections, the led
associated to the key remains ignited:
Note: the total number and numbers of single selections
CANNOT be zeroed.
18. DATA menu: COUNTERS
Access the DATA MENU, pressing the “
i
”
(
27
) key. The
following will be displayed:
Use the “
+
”
(
30
) and “
-
”
(
31
) keys to position the
cursor on the COUNTER line, then press the
PRG
(
29
)
To access the various menus, position the cursor on the
line that interests you, using the “
+
” (
30
) or “
-
” (
31
) keys.
Press the
PRG
(
29
) key and then press the “
+
”
(
30
)
or “
-
”
(
31
) keys to reset the number. The meter will be
reset.
When the
key is pressed, zeroing is confermed.
Press the
RES
(
24
) key to return to the main menu.
The total number of coffees and the number of cycles
CANNOT be zeroed.
The total number of grinding procedures recorded for the
two grinders (MM1 and MM2) can only be zeroed by the
installer technician when the grinders are replaced.
À
DATA MENU
COUNTERS MENU
ACCOUNTING
+
À
COUNTERS MENU
N
FRIIHH
N
PLON
N
ZDWHU
N
VWHDP
N
VWHDPDQGDLU
+
18.1 DATA menu: ACCOUNTING
Pressing again the
PRG
(
29
) key, on the display will
appear the number of all dispensings performed and the
number of dispensing for each selection key:
À
DATA MENU
COUNTERS MENU
ACCOUNTING
+
Use the “
+
”
(
30
) and “
-
”
(
31
) keys to position the
cursor on the ACCOUNTING line, then press the
PRG
(
29
) key. The following will appear on the display:
À
ACCOUNTING
COUNTERS MENU
+
À
COUNTERS MENU
T
otal: 125348
S
HO
S
HO
S
HO
S
HO
+
À
COUNTERS MENU
T
otal: 125348
S
HO
S
HO
S
HO
S
HO
+
À
COUNTERS MENU
T
otal: 125348
S
HO
S
HO
S
HO
S
HO
+
key. The following will appear on the display:
02_S39 TE_MULTI.indd 25
07/11/2017 17:00:25