L3Harris NARDA AMS-8061, User Manual

Page: 212 / 242

5-44 SMS Messages and Commands
Reserved
D07 D06 D05 D04 D03 D02 D01 D00
Byte +9
The 16 bit figure named Peak is shown as follows:
D15 D14 D13 D12 D11 D10 D09 D08 D07 D06 D05 D04 D03 D02 D01 D00
Peak
Byte +10/+11
16 bit unsigned integer
It is the Peak value detected in the stored interval, of field strength measured in the band. The number
should be considered as a Little-endian unsigned 16 bit integer multiplied by the Scaler above
calculated. In the particular case in which the figure Peak is equal to 0xFFFF then Peak value must
be considered invalid (AMS-8061 was not able to get a measurement) and the data are meaningless.
If, for example, 16 bit figure named
Peak is 325 and the Scaler 0.01 then the PEAK field strength
value related to the band will be 3.25.
The 16 bit figure named Avg is shown as follows:
D15 D14 D13 D12 D11 D10 D09 D08 D07 D06 D05 D04 D03 D02 D01 D00
Avg
Byte +12/+13
16 bit unsigned integer
It is the averaged value, either RMS or AVG, detected in the stored interval, of field strength measured
in the band. The number should be considered as a Little-endian unsigned 16 bit integer multiplied by
the
Scaler
above calculated. In the particular case in which the figure
Avg
is equal to
0xFFFF
then
Avg
value must be considered invalid (AMS-8061 was not able to get a measurement) and the data
are meaningless.
If, for example, 16 bit figure named
Avg
is 2153 and the
Scaler
0.001 then the
Avg
field strength
value related to the band will be 2.153.
Reserved
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Byte
+14/+15