L3Harris NARDA AMS-8061, User Manual

Page: 109 / 242

8061SW-02 - User’s guide and Data Display
3-59
3.24.3 Trace
The Trace command allows to select which traces will be displayed in the
graph.
The possible choices are:
•
Temperature ; indicates the temperature of the environment for each
data reading;
•
Battery ; provides the voltage of the batteries whenever the field data
are stored;
•
Charging current ; provides the consumption current of the station
whenever the field data are stored;
•
RH ; indicates the Relative Humidity of the environment for each data
reading;
•
Peak ; used to hide or display the peak trace for each band using
vertical bars (which can be selected individually);
•
RMS ; used to hide or display the RMS trace for each band using
vertical bars (which can be selected individually);
•
Disturbance Band ; used to hide or display any disturbance activity
using vertical bars (which can be selected individually);
Any data affected by disturbance activity will be marked in the txt table
with the asterisk (*) if
Global is enable at the time of activating the
Save Export File Setup function. The asterisk (*) is hide if Global is
disable.
Global enable
Global disable
•
Alarm Band ; used to hide or display any activity of alarms with vertical
bars (which can be selected individually);
•
Display Temp&Volt when ON ; shows traces of the temperature and
voltage on the graph when enabled;
•
All Traces ON
; shows all traces;
•
All Trace OFF ; hides all traces.