L3Harris NARDA AMS-8061, User Manual

Page: 134 / 242

4-10 Point to Point and FTP Communication
- Insert the Station Identifier: it is the name you decide to give to your
monitor station. As default it is the serial number of the station.
- Insert the Telephone Number: it is the phone number associated to the
SIM card in the area monitor
- Insert the Device Password: as default it is PASSPMM
For every field the computer will request the Terminal Password (see
§3.4.1 and §3.4.1.1).
Now your area monitor should be added to the list.
Click once on its row and then press the button
Call .
Every time, the software will try to have a connection with the modem.
Because of the area monitor is directly connected to the PC you will see the
following window:
Press YES (SI)
Now the software will verify if the name you gave to the station is the same
registered in the station’s memory. In case they are not matching the
software will ask you if you want to change the name of the area monitor,
stored in the internal memory, with that one you wrote in the grid, with the
following window:
If you press YES the name inside the station will be changed.
This name it is just a label, the serial number of the area monitor will be
always the same and cannot be changed.
If you press NO, the software will ask you if you want to replace the name in
the grid with that one stored in the area monitor.