IP Routing. The IP Routing page is used to configure the routing settings for the wireless network,
including the use of mesh networking or static routes.
Security. The Security page is used to configure wireless network encryption and view the MAC Address
Revocation list.
Admin. The Admin page is used to assign the Radio ID (radio node name), upload security and network
configuration files, reboot the radio, and install new radio firmware.
Statistics. The Statistics page provides detailed information regarding radio performance.
Interfaces Page
The Interfaces Page provides a list of tabs that can be used to configure each interface of the NovaRoam.
Selecting a tab will provide a list of configurable options for the selected interface.
Ethernet Tab
The Ethernet Tab is used to configure all aspects of the NovaRoam’s Ethernet interface. The following
parameters can be viewed or configured:
•
MAC ID. This read-only field displays the unique Media Access Control (MAC) address of the
NovaRoam. No two network devices will use the same MAC Address.
•
IP Address. Specifies the IP Address of the Ethernet interface of the NovaRoam. The default IP
Address is 192.168.200.1
•
Subnet Mask. Specifies the subnet mask of the Ethernet interface. The default subnet mask is
255.255.255.0.
•
MTU. The Maximum Transmit Unit (MTU) specifies the maximum Ethernet packet size (in bytes)
which can be transmitted without being fragmented. The default value of 1500 bytes should be
appropriate for most applications.
•
Apply: Saves changes made to the configuration of the Ethernet Tab. Changes will not be
saved if you change to a different configuration tab without first pressing the apply button.
Wireless Tab
The Wireless Tab is used to configure all aspects of the NovaRoam’s wireless interface. The following
parameters can be configured or viewed: