L3 Mobile-Vision Flashback3 User Manual Download Page 75

Page: 75 / 280

DVR Settings

Changing the Audio Settings

Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision



6.23.2017

P a g e 67

Turning the VLP1 Audio On/Off

This section describes how to turn your VLP1 port’s audio setting

off

. If this

setting is

, audio from the VLP2 or VLX wireless microphone connected to input

port VLP 1 will be recorded. If this setting is

off

, audio from the VLP2 or VLX

wireless microphone connected to input port VLP 1 will

not

be recorded.

Make sure the door to your DVR is open and Auto mode is

off

. (If necessary, press

the

button until the

light turns

off

Press

. The Main Menu displays.

Press the

button until

Recording

is highlighted.

Press

to select the

Recording

option. The Recording menu displays.

Summary of Contents for Flashback3
























































































































































































































































































Search results

Summary of Contents for Flashback3

Reviews:

L3 Mobile-Vision Flashback3, User Manual, Page: 75 / 280

Search results

Summary of Contents for Flashback3

Reviews: