DVR Settings
Entering/Changing the Ethernet Options
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision
6.23.2017
P a g e 175
NOTE
: The IP range that you specify in the
Start IP
and
Stop IP
fields must be
outside the range of any existing DHCP servers.
17
To enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the
button to advance to the first segment you wish to change.
18
If the current value of this IP segment is
0
, proceed to the next step.
– OR –
If the current value of this IP segment is
1 – 255
, use the
or
buttons to move
the numeric display higher or lower, respectively. Next, skip to step 20.
19
Press
. The number
255
displays. Keep pressing the
button until the desired
number displays. (If you overshoot the number, press
to back up.)
20
Use the
button to advance to the next segment you wish to enter/change.
21
Repeat steps 18 – 20 until all four segments of the IP address are entered/updated.
22
Once the correct IP address displays in the
Start IP
field, press
.
23
Press
to advance to the
Stop IP
field.