DVR Settings
Entering/Changing the Wireless Security Settings
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision
6.23.2017
P a g e 177
Entering/Changing the Wireless Security Settings
This section describes how to enter and/or change the wireless security settings.
WARNING
: In order for the automatic transmission process to work properly, these
settings must match those on the Wireless Access Points. Do not change any of these
settings unless instructed to do so by your agency’s Network Administrator
or
an L3
Mobile-Vision Support technician.
For specific instructions, see:
Changing the Wireless Security Mode, below
Changing the Wireless Authentication Type, page 179
Changing the Wireless Encryption Type, page 182
Entering the Wireless Encryption Key, page 185
Entering Your Wireless SSID, page 188
Entering a Wireless Password, page 191
Turning the Wireless SSL Indicator On/Off, page 194.
Changing the Wireless Security Mode
This section describes how to change the wireless security mode. By default, this
option is set to
WEP-PSK
.
1
Make sure the door to your DVR is open and Auto mode is
off
. (If necessary, press
the
button until the
light turns
off
.)
2
Press
. The Main Menu displays.
3
Press the
or
button until
Network
is highlighted.