L3 comminications 6000 User Manual Download

Page: 13 / 64

• P

AGE

to the power supply to ensure proper operation

and recharging of the battery.

• Reinstall the battery door and close it

completely by pushing down on the arrows and

using slight pressure until the door is in place.

3. Install SIM Card

The SIM card is not included with the Terminal and

must be acquired from the service provider. Terminal

is designed to interface with 3V SIMs only.

Make sure the power is OFF before inserting

the SIM card!

• Locate the SIM slot on the left side of the

GSM Terminal (Fig. 6).

Figure 9. SIM compartment location

• Using a pen or other pointed object, depress

the button inside the slot and pop out the SIM

card tray (Fig 7).

Figure 10. Opening SIM compartment

• Install the SIM in the tray, and carefully insert

the tray back into the slot. (The SIM will be

flat within the tray.)

UICK

ETUP

UIDE

Summary of Contents for 6000

































































Search results

Summary of Contents for 6000

Reviews:

Related manuals for 6000

Brands by name

Popular brands

L3 comminications 6000, User Manual

Search results

Summary of Contents for 6000

Reviews:

Related manuals for 6000

Brands by name

Popular brands