L3 comminications 6000 User Manual Download

Page: 63 / 64

• P

AGE

WARRANTY INFORMATION

L-3 Communications Global Network Solutions

warrants that for a period of one (1) year from

the date of shipment, equipment delivered by L-3

Communications Global Network Solutions shall be

free from defects in material or workmanship under

normal use and service.
Any claim of defect in material or workmanship shall

be submitted promptly in writing and shall include

an explanation of the circumstances leading to such

claim. Upon receipt and verification of such claim, L-3

Communications Global Network Solutions shall take

reasonable and prompt action to correct such defect,

in its exclusive discretion, by repair, replacement or

both. L-3 Communications Global Network Solutions

liability under this warranty is limited to repair or

replacement of the defective parts and its liability

shall in no case exceed the purchase price of the

equipment under the warranty. L-3 Communications

Global Network Solutions shall at its exclusive option,

repair or replace defective parts and shall have the

exclusive option to effect such repair at the installation

or at its plant.

If a defect is determined by L-3 Communications

Global Network Solutions to be the responsibility of

or caused by the buyer, the buyer’s agent or customer

or by other equipment under the control of the buyer,

buyer shall pay all repair or replacement costs incurred

by L-3 Communications Global Network Solutions.

This warranty does not cover expendable items such as

lamps, batteries, light bulbs, fuses, etc. or other items

carrying a Separate Vendor Warranty. The buyer shall

be responsible for return transportation and the safe

arrival of all items returned to L-3 Communications

Global Network Solutions under this warranty.
It is understood and agreed that there are no warranties

made by L-3 Communications Global Network

Solutions of merchantability or fitness for a particular

purpose and that there are no warranties whatsoever,

either expressed or implied, except as to title other than

those warranties which are specifically set forth herein.

For further information, please refer to L-3

Communications Global Network Solutions Return

Authorization Procedure.

ARRANTY

NFORMATION

Summary of Contents for 6000

































































Search results

Summary of Contents for 6000

Reviews:

Related manuals for 6000

Brands by name

Popular brands

L3 comminications 6000, User Manual

Search results

Summary of Contents for 6000

Reviews:

Related manuals for 6000

Brands by name

Popular brands