Instruction Manual
Installation & Operation
Model FA2100 CVR
165E1846–00
Jan. 01/03
Rev. 07
Page 7
C.
Heavy Duty Vibration Mount, Part Number 93–955
CVR mount for use in aircraft environments where excessive vibration may occur, such as in rotorcraft or
test aircraft. Contact Aviation Recorders Product Support for Full Sway Envelope and Outline and
Dimension Drawings.
D.
Connector for CVR Mount
Connector attaches to mount, and mates with the connector on the FA2100 CVR’s rear panel. Aircraft
wiring is soldered or crimped to the connector pins.
Solder – Part Number 9300–435
Crimp – Part Number 063–98–01474
1.5
Abbreviations and Acronyms
For definition of abbreviations and acronyms used in this document, refer to Appendix D.
2.0
EQUIPMENT LIMITATIONS/SPECIFICATIONS
2.1
Applicable Documents
ARINC Characteristic 404A
Aeronautical Radio, Inc., Air Transport Equipment Cases and
Racking
ARINC Characteristic 757
Aeronautical Radio, Inc., Cockpit Voice Recorder
ARINC Report 604–1
Aeronautical Radio, Inc., Design Guidance for Design and Use
of Built-In Test Equipment
ARINC Report 624–1
Aeronautical Radio, Inc., Design Guidance for Onboard Mainte-
nance System
EUROCAE MOPS ED–55
European Organization for Civil Aviation Equipment Minimum
Performance Specification for Flight Data Recorder Systems
EUROCAE MOPS ED–56A
European Organization for Civil Aviation Equipment Minimum
Performance Specification for Cockpit Voice Recorder System
FED–STD–595
Federal Standard, Colors
RTCA/DO–160C
Radio Technical Commission for Aeronautics, Environmental
Conditions and Test Procedures for Airborne Equipment
RTCA/DO–178B
Radio Technical Commission for Aeronautics, Software Consid-
erations in Airborne Systems and Equipment Certification
TSO–C123a
Federal Aviation Administration Technical Standard Order
Cockpit Voice Recorder Systems