BPA10T30W100
Broadband System User Manual
E-Mail: [email protected]
www.l2microwave.com
- 19 -
4.3.2.
LAN Control
• IP Address Set
To connect to the LAN, User has to check the user’s network IP Address and be entered network IP address into
the amplifier system.
In order to input IP Address to the amplifier system, it must be entered on the LCD window and the LCD GUI
program at the same time.
The procedure to enter is as follows.
1.
Connect amplifier system and user’s network with LAN line.
2.
Click the LAN box on the LCD of Amplifier system and activate it.
→
3.
In order to activate the “Control Panel folder” of window, click the control button on the LAN box.
4.
To create the following folder, click “Control Panel folder”.
<Activate Control Panel folder of window>
- Click the 3
rd
button, The following folder is created.
- Click the 3
rd
button (GMAC).
The following “‘Remote-NDIS Host’ Settings” is created.
Record user’s network IP Address in the activated “’Remote_NDIS Host’ Settings” folder.
It is important to note that the 4
th
value is a number different from the user's network IP Address to avoid collision.
