USER’S MANUAL OF LK-320E
LABEL & MARK INDUSTRIES COMPANY
4
Warning:
Do not touch the print head face or the connector;
otherwise the print head may be damaged as a
result of static.
Warning:
This equipment is fitted with a cutting knife. Do not
put your fingers near it during use. Be careful to
keep clear of the cutting knife during handling.
2. Points of attention
1) The printer shall be put on a flat and stable place.
2) Do not use the printer or store it in hot, damp or heavily polluted places.
Besides, keep it sheltered from sunshine, bright light and heat sources.
3) Do not put the printer in a place which is under the influence of vibration
or impact.
4) Do not allow damp air condensate on the surface of the printer. If there is
any condensate water, do not turn on the printer power supply before the
condensate water disappears.
5) Connect the printer’s power adaptor to a suitable earthed power socket.
Avoid sharing a same power socket with other large dynamos or other
equipment that may give rise to voltage fluctuation.
6) If the printer is expected to be idle for a long time, disconnect the printer
from the power supply.
7) Be careful to avoid introducing water or conducting matters (like metals)
into the printer. Disconnect the power supply immediately in case of such
introduction.
8) Do not print if there is no print material loaded, otherwise the printer
rubber roll and print head may be severely damaged.
9) Disconnect the power supply before making connection or disconnection;
otherwise the printer control circuit may be damaged.
10) Do not attempt to dismantle the printer to repair by yourself. Unauthorized
dismantling or alteration of this printer is prohibited, otherwise the
high-voltage components inside may give rise to fire accident or electric
shock.
11) For the benefit of safety, when the “protective cover” is opened the printer
DACO Company Limited
www.dacovn.com
Hotline: 0904 82 235
