USER’S MANUAL OF LK-320E
LABEL & MARK INDUSTRIES COMPANY
18
2.3.4 Connection of AC power adaptor
1. Switch off the power supply.
2. Plug one end of the AC power adaptor connection cable into the round socket
on the side of the machine.
3. Plug the other end of the AC power adaptor connection cable into an AC power
supply socket.
[Attention]
Never plug AC power adaptor cable into data line socket.
Do not connect AC power adaptor cable into power supplies other than rated
voltage (100V to 240V), otherwise fire accident or electric shock may result.
2.3.5 Power switch
Upon power on, the machine will emits a “De---” sound and the following power-on
screen will be displayed. At this time, the cutter dynamo will initialize. Then, the
machine will display the text edit window.
Automatic power off
To save power and to extend its service life, if the machine has been idle for 10
minutes while powered on without any operation, the automatic power off function
will be performed. A machine in automatic power off mode has no response at all.
To cancel this mode, switch off the power and power on again 3 seconds later.
[Attention]
A machine in automatic power off mode still consumes a little energy. Therefore, be
sure to switch off the power supply if the machine is to be idle for a long time.
Replacement of the cutter
L-MARK
Note:
Do not switch on and off the machine repeatedly.
Power on the machine several seconds after it is being
switched off. Do not switch on the machine
immediately after it is switched off, otherwise miss
operation or data loss may result!
DACO Company Limited
www.dacovn.com
Hotline: 0904 82 235
