http://www.L
‐
com.com
15
Profile configuration – System Config Tab
This Tab allows configuration of basic connection parameters.
Profile Name
– Enter a name to identify your profile. Default is
PROF1
.
SSID
–Enter a network service set identifier (SSID) or select from a list of active
networks. If SSID broadcast function of AP is disabled, SSID must be entered
manually.
Network Type
– You can select two wireless network types:
z
The
Infrastructure
mode supports communications between a wireless
network and a wire network using an access point.
z
The
Ad hoc
mode supports peer to peer communications between two
wireless network devices.
TX Power
–Set the signal transmit power to be used by the radio transmitter.
Choose the appropriate value from the drop-down list.
Preamble
–Select the preamble length, default is
Auto
.
Channel
–Select the channel to be used when establishing an Ad hoc network.
Power Save Mode
–Select the power saving mode.
z
Using
CAM
(Constantly Awake Mode), the network adapter will operate at
full power when connected to mains.
z
Using
PSM
(Power Saving Mode), the network adapter will enter power
saving mode.
RTS Threshold
–Use the slider or enter a value for the RTS threshold in the field
provided. Default value:
2347
.
Fragment Threshold
–Use the slider or enter a value for the fragment threshold
in the field provided. Default value:
2346
.
Summary of Contents for ARK-2404U-3
Page 9: ...http www L com com 9...
Page 11: ...http www L com com 11...