Support Leg
Wing Bolt
Ignition Hole
Safety Shut-off Valve
Heat Regluator Knob
(After setting support leg, tighten wing nut)
TT15 SERIES
TT30 SERIES
Tip Over Switch
Heat Regulator Knob
Propane Tank Valve
Fuel Connecting Bolt ( Handle)
Mounting Bolt knob
Inlet Connector
6
E
N
G
L
I
S
H
Connecting Heater to
Propane Tank (Continued)
5. For CR015 loosen the wing bolt
securing the support leg and
position it firmly on the surface
of the cylinder. Tighten wing bolt
firmly.
6. Open propane tank valve slowly by
turning counterclockwise .
7. Check all fittings for leaks. Apply a
50/50 mixture of liquid soap and
water to all joints. Bubbles forming
show a leak. Correct all leaks at once.
WARNING
Never use an open
flame to check for
leaks.
8. Always remove propane tank from
heater after each use. Do not store
heater while attached to propane
tank.
Sun Blast Operating Instructions and Parts Manual
Sun Blast
®
Propane Tank Top
Construction Heater
Figure 2
Figure 3
CR015 and CR030
Model CR030
Model CR015
Tip over Switch
Mounting Bolt Knob
Propane Tank Valve
Inlet Connector
Handwheel
Heat Regulator Knob
Wing Bolt
Safety Shut-off valve
Heat Regluator Knob
Ignition Hole
Support Leg
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
