background image

Contact your local L.B. White dealer for replacement parts

and service or call the L.B. White Co., Inc. at (800) 345-

7200 for assistance.  Be sure that you have your heater

model number and configuration number when calling.

L.B. White Co., Inc. warrants that the component parts of its

heater are free from defects in material and workmanship,

when properly installed, operated, and maintained in

accordance with the Owner’s Manual safety guides and

labels contained with each unit.  If, within 1

12 m

months ffrom

the  ddate  oof  ppurchase  bby  tthe  eend  uuser, any component is

found to be defective, L.B. White Co., Inc. will at its option,

repair or replace the defective part or heater, with a new

part or heater, F.O.B., Onalaska, Wisconsin.  

A warranty card on file at L.B. White will automatically

qualify the heater and its component parts for warranty

consideration.  If a warranty card is not on file, a copy of the

bill of sale will be required to establish warranty

qualification.  If neither is available, the warranty period will

be 12 months from date of shipment from L B. White.  

Warranty Policy

Replacement Parts and Service

EQUIPMENT

PARTS

L.B. White Co., Inc. warrants that replacement parts

purchased from the company and used on the appropriate

L. B. White heater are free from defects both in material and

workmanship for 12  m

months  ffrom  tthe  ddate  oof  ppurchase  bby

the eend uuser. Warranty is automatic if a component is found

defective within 12 months of the date code marked on the

part.  If the defect occurs more than 12 months later than

the date code but within 12 months from the date of

purchase by the end user, a copy of a bill of sale will be

required to establish warranty qualification. 

The warranty set forth above is the exclusive warranty

provided by L.B. White, and all other warranties, including

any implied warranties or merchantability or fitness for a

particular purpose, are expressly disclaimed.  In the event

any implied warranty is not hereby effectively disclaimed

due to operation of law, such implied warranty is limited in

duration to the duration of the applicable warranty stated

above.  The remedies set forth above are the sole and

exclusive remedies available hereunder.  L.B. White will not

be liable for any incidental or consequential damages

directly or indirectly related to the sale, handling or use of

the heater, and in any event L.B. White's liability in

connection with the heater, including for claims based on

negligence or strict liability, is limited to the purchase price.  

Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above

limitation or exclusion may not apply to you.  This warranty

gives you specific legal rights, and you may also have other

rights which vary from state to state.

33

48

Cord, Power

24502

49

End Cap, Sliding Handle

22934

50

Handle, Sliding

22931

51

Button, Snap

22932

52

Bracket, Handle - Left (Air Discharge Side)

22929

Right (Hose Hanger Side)

22930

53

End Cap, Handle Bracket

22933

54

Bolt

11254

55

Washer

03054

56

Hanger, Hose

08936

57

Hinge

05868

58

Door, Louvered

09137

59

Case Assembly

24530

60

Door

20757

61

Screw

01213

62

Strain Relief

20037

63

Clip, Conduit

08254

64

Conduit

22747

65

Plug

25747

PREMIER 170 PARTS LIST (Continued)

Summary of Contents for Premier TS170



































Reviews: