100 POUND L.P. GAS
SUPPLY CYLINDER
OR GREATER
(REGULATOR VENT
MUST POINT DOWN)
TENT SIDE WALL
TENT DRAPED
OVER DUCT
DUCT KIT
DISTANCE FROM HEATER TO TENT MUST COMPLY
WITH LOCAL CODES, AND ACCORDING TO
MANUFACTURER'S REQUIREMENTS.
SLOTS
DUCT ADAPTER
W/ TABS
DUCT KIT
TABS
11
T-STAT W SERIES
TAP PLUG
HEAVY DUTY EXTENSION
CORD W/ GROUND
HEATER POWER CORD
1. The remote thermostat has a series tap plug at the
end of the cord.
2. Connect male plug on heater into female side of
series tap plug on thermostat. See Fig. 7.
3. Plug male side of series tap plug into grounded,
heavy-duty, electrical extension cord. Plug extension
cord into approved electrical outlet.
FIG. 7
THERMOSTAT ASSEMBLY
1. Extend duct kit to 12 ft. length.
2. Insert tabs on adfapter into slots at blower outler of
heater. See Fig. 8. Push down to secure in place.
See below typical installation of heater located to
exterior of tent.
FIG. 8
DUCT KIT ASSEMBLY
Optional Accessory
08978
Summary of Contents for Premier TS170
Page 2: ......