L.B. White CP155 Owner'S Manual And Instructions Download Page 29

Page: 29 / 31

PARTS LIST

Part Number

Tradesman 155

Item

Description

ULTRA

Regulator with POL (Propane Gas)

-----------------21856---------------

Regulator (Natural Gas)

-----------------06713---------------

Hose, Fixed X Swivel, 3/8 in. x 10 ft. Propane

-----------------21841---------------

Hose, Fixed X Swivel, 1/2 in. x 10 ft. Natural Gas

-----------------20504---------------

Adaptor, Hose, 3/8 in. (Propane Gas)

-----------------06654---------------

Adaptor, Hose, 1/2 in. (Natural Gas)

-----------------02894---------------

Nipple

-----------------02421---------------

Bushing, Pipe

-----------------01195---------------

Nipple, 1/2 in. Close

-----------------01305---------------

Valve, Manual

-----------------05548---------------

Thermostat Knob

-----------------22214---------------

Thermostat

-----------------24676---------------

Power Cord

----------------05795---------------

Switch, ON/OFF

----------------03834-----------------

Lens, L.E.D.

----------------22299----------------

Bolt

----------------01151---------------

Wire,Black, 12 in.

----------------24596---------------

Wire, Red, 14 in.

----------------22630---------------

Solenoid Valve, 120V

----------------24642---------------

Union, Half

-----------------04786---------------

Sleeve, Compression

-----------------03879---------------

Nut, Compression

-----------------05772---------------

Tube, Formed Copper, w/ Nuts and Sleeves

-----------------24641---------------

Wire, Red, 18 in.

----------------24595---------------

Direct Spark Ignition Control

----------------24650----------------

Screw, Ignition Control

----------------09043---------------

Nut

----------------86169---------------

Air Inlet Guard

----------------22387---------------

Switch, Backflash, Assembly

--------------- 06687---------------

Switch, Air-proving, Assembly with Bracket

--------------- 06739---------------

Wire Harness

----------------24597---------------

Bracket, Motor Mount

----------------06400---------------

Motor

----------------03830---------------

Fan

----------------21575---------------

Wire, Igniter

----------------09347---------------

Igniter

----------------08834---------------

Burner Plate,

----------------06429---------------

Orifice with Retaining Clips, (Propane)

----------------06685---------------

Orifice with Retaining Clips, (Natural Gas)

----------------06686---------------

Burner Assembly, LP Gas

----------------22366---------------

Natural Gas

----------------22368---------------

Case, Top

----------------06222---------------

Handle

----------------03941---------------

Screws

----------------03973---------------

Nut

----------------04955---------------

Screw, Thermostat

----------------04955---------------

Harness, LED

----------------22300----------------

Bolt, Motor

----------------03140---------------

Nut, Motor

----------------04955---------------

Bushing

----------------05768---------------

Base Assembly with Bottom Barrel, LP Gas 572434 572435

Natural Gas 572437 572436

Summary of Contents for CP155
































Search results

Summary of Contents for CP155

Reviews:

Related manuals for CP155

Brands by name

Popular brands

L.B. White CP155, Owner'S Manual And Instructions

Search results

Summary of Contents for CP155

Reviews:

Related manuals for CP155

Brands by name

Popular brands