Rigging system description
X-UTILT intended use
Use X-UTILT only vertically and for negative site angles.
Assembling X-UTILT with X-US8 or X-UL8
X-US8 and X-UL8 have three holes for assembling with X-UTILT. Use hole 1 (furthest from the label) to secure the U-
bracket to X-UTILT, and hole 2 to secure the rigging arm. Hole 3 is reserved for storage (0° site angle).
1
2
3
1
2
3
1
2
3
When using X-US8, the bracket must be secured with the label on top.
label
Fasteners for wall-mounting
Secure X-UTILT with two M10 screws.
Select screw length and anchors applicable to the wall properties.
18
X8 owner's manual (EN) version 1.0
