KUDO
®
MULTI-MODE WST
®
SYSTEM
Rigging Procedures
VERSION 1.0
KUDO_RM_ML_1.0
w w w . l - a c o u s t i c s . c o m
22 en
12.
On each KUDO
®
enclosure, remove the dolly board by pulling on the captive BLP lanyards.
Figure 29: Pulling on the captive BLP lanyards
13.
a.
Slightly raise the stack and place one support base in position.
b.
Use
the base-supported KJACK to raise the stack and facilitate the placement of the second support base.
Figure 30: Placing the KJACK support bases in position
