SB18_RM_EN_1-0
w w w . l - a c o u s t i c s . c o m
7
7
7
7
3
3
3
3
SYSTEM
SYSTEM
SYSTEM
SYSTEM SET
SET
SET
SET----UP
UP
UP
UP
Dismantling an array
Apply the associated set-up procedure in reversed order.
Independent or mixed
This document only deals with independent rigging of the SB18 subwoofer enclosure.
When using the SB18 enclosure as a companion to a main system, some combined configurations will imply
the set-up of mixed arrays. At this point, it is especially the case of KARA/SB18 arrays. Always refer to the
rigging manual of the main system or enclosure to get acquainted with the rigging procedures specific to the
mixed main/sub arrays.
Cardioid configuration
The cardioid configuration is in an array of 4 subwoofers with 1 reversed element.
Refer to the subwoofer
user manual
for details about the CARDIOID operating mode.
Any of the following arrangements can be set in cardioid configuration.
3.1
Ground-stacking
Vertical
Option 1: Stacked on the floor
Option 2: Platform-stacked
Place and attach the enclosures on
top of each other (logo down)
Refer to PROCEDURE
A
Prepare
the M-BUMP
stacking platform
Refer to PROCEDURE
B
Place and
attach a first SB18
(logo up)
to the platform
Refer to PROCEDURE
A
Place and attach the enclosures
(logo up) on top of each other
Refer to PROCEDURE
A
Block
Set vertical stacks, side by side, one after the other, by placing and
attaching the SB18 enclosures on top of each other (logo down)
Refer to PROCEDURE
A
Horizontal On-end
Place the SB18 enclosures side by side
