Rigging procedures
8.
Set the inter-enclosure angles.
Do not use this method for an array bigger than eight enclosures.
Any additionnal enclosure must be connected one by one as follows.
9.
Connect a Kiva II (logo on the right-hand side) under the array.
CLICK !
Set the inter-enclosure angle.
Align the mark on the rigging arm with the chosen angle mark.
SHLAK !
7.5°
Final check
The yellow label is not visible on the logo side.
Shake the assembly up and down and from side to side to verify that all linking points are secured.
Kiva II rigging manual (EN) version 2.0
22
Summary of Contents for KIBUII
Page 1: ...KIVA II rigging manual EN...
