Rigging procedures
Assembly
Procedure
1.
Bring a stack of four Kiva II (logos on the right-hand side) under the lifting point.
All angles must be at 0°.
2.
Secure the rigging frame on top of the stack.
- With KIBU-SB
Use the front or rear position.
Select the 0° angle on the rigging arm.
Secure the rigging arm with the ball-locking pin.
Front position
Rear position
CLICK !
CLICK !
0°
0°
Final check
The yellow label is not visible on the logo side.
Shake the assembly up and down and from side to side to verify that all linking points are secured.
Kiva II rigging manual (EN) version 2.0
18
Summary of Contents for KIBUII
Page 1: ...KIVA II rigging manual EN...
