Rigging procedures
Assembly
Procedure
1.
Secure KIBU-SB on SB15m.
Use the coupling bars provided with the KIBU-SB.
Secure the coupling bars with the locking tabs.
CLICK !
Make sure the safety label on each locking tab is fully covered.
Make sure the lugs are in the notches.
2.
Lift the array.
3.
Position a SB15m under the assembly.
4.
Lower the array until it rests on the subwoofer
Kiva II rigging manual (EN) version 2.0
24
Summary of Contents for KIBUII
Page 1: ...KIVA II rigging manual EN...
