KARA
i
®
MODULAR WST
®
SYSTEM
RIGGING PROCEDURES
VERSION 1.1
KARA
i
_RM_EN_1-1
w w w . l - a c o u s t i c s . c o m
12
3.
Attach KARAi#1 to the M-BUMPi by driving four self-locking M6 hex bolts (included in the M-BUMPi package)
into the KARAi#1 top link holes and the M-BUMPi link holes (5 mm hex bit, 10 mm hex key, 5 N.m/45 in.lb
f
).
On each angle arm, select hole 10° (KARAi#1 projection axis parallel to the M-BUMPi).
The angles values corresponding to the different holes are detailed in Figure 6.
Figure 7: Attaching KARAi#1 to M-BUMPi
IMPORTANT
Full view
Detailed view of the front left bolt
Angle 10°
Detailed view of the rear left bolt
Summary of Contents for KARAi
Page 1: ...KARAi rigging manual EN ...