Rigging procedures
11.
Set the KARA#1-3 array for transport as follows:
a) On both sides of KARA#1, remove the front top link R-BLP, slide the front arm up, rotate down, and secure by re-
inserting the R-BLP on the top storage hole.
b) On both sides of KARA#1, remove the rear top R-BLP, slide the angle arm so as to align the cursor with the
storage position, and secure by re-inserting the top R-BLP on the top storage hole.
c) Put the ight-case lid back in place.
12.
(p.97) to 11 until all Kara enclosures are removed.
13.
(Optional) On the M-BUMP, put both KARA-ANGARMEX in storage position as follows (repeat for each one):
a) Remove the rear R-BLP, remove the KARA-ANGARMEX, and re-insert the R-BLP into the M-BUMP hole.
b) Put the KARA-ANGARMEX horizontally in its storage location and secure by inserting the T-BLP.
100
Kara owner's manual (EN) version 1.0
