L-Acoustics A15 Focus Owner'S Manual Download

Page: 96 / 98

Installing an inclinometer on A15-BUMP

Installing an inclinometer on A15-BUMP

Tools

• torque screwdriver
• T20 Torx bit
• 7 mm wrench

About this task

A15-BUMP is equipped with a support plate for installing an optional inclinometer. Three models are compatible:

TEQSAS

LAP-TEQ PLUS (provided in the

TECH TOOLCASE

), TEQSAS

LAP-TEQ (legacy model), and KSG

RECLINE

Compact.

LAP-TEQ / LAP-TEQ PLUS sensor and display compatibility

The legacy LAP-TEQ sensors are compatible with the new TEQSAS

LAP-TEQ PLUS displays.

Conversely, the new sensors are

not

compatible with the legacy displays.

With two sets of xation points and eight slit openings, the position and orientation of the laser support plate can be

adapted to every use of the rigging frame.

support plate

slit openings (front)

slit openings (rear)

fixation points (front)

fixation points (rear)

Calibrating the inclinometer

Refer to the manufacturer instructions.
An additional XLR cable is needed.

Exploded view

Use the screws and nuts provided with A15-BUMP.
Before tightening the screws, align the laser with the slit opening.

T25

3 N.m

7 mm

A15 owner's manual (EN) version 1.2

Summary of Contents for A15 Focus



































































































Search results

Summary of Contents for A15 Focus

Reviews:

Related manuals for A15 Focus

Brands by name

Popular brands

L-Acoustics A15 Focus, Owner'S Manual

Search results

Summary of Contents for A15 Focus

Reviews:

Related manuals for A15 Focus

Brands by name

Popular brands